When you are planning a home addition project, there is going to be some roofing that needs to be done. The remodeling will require at least a small section of new roofing, but it is usually a better idea to completely install a new roof to prevent problems and tie everything together. The following information will help with the roof installation for your home addition project:
- Removing Roofing Existing Structure—The first thing that needs to be done is to remove the old roofing from the existing structure. Start removing roofing where the new addition will tie into the existing structure. Once the addition is completed, the rest of the shingles can be removed from the roof, and new materials can be installed at the same time.
- Making Structural Changes for Additions—The common way to do a home addition is to install the new framing on top of old shingles or the roof decking. For a better addition that ties into the existing structure, the roof decking and rafters can be removed in these areas to make sure the addition is part of the existing structure. This will prevent problems with the roof and water traps, as well as make the addition to your home more attractive.
- Improvements to Roof Design to Reduce Wear—The roof design can also be improved to reduce wear in common areas. First, you want to make sure that areas where the addition ties into the existing structure do not cause water traps. In other areas of the existing structure and addition, you will want to make improvements to the roof design to prevent similar problems with water traps, which are a common problem where there are changes in the roof slope.
- Choosing the Right Type of Energy Efficient Roofing—Lastly, the roofing is going to need to be installed on the existing roof and the new addition. The first step in the installation of the new roofing is to install a moisture barrier, which should be a modern, synthetic, and energy-efficient material. When installing the roofing materials, you want to make areas like the eaves are reinforced with an ice barrier system to prevent wear and damage to shingles in these areas. If you are installing wood shakes, metal, or other roofing materials, rubber membrane reinforcements can be used in areas that are more prone to leaks, wear, and damage.
The addition you are planning for your home is going to need a new roof, and this information should help. If you are ready to add a roof to your home after an addition, contact a home roofing installation service like https://www.ratliffenterpriseskc.com and talk to them about the right solutions for your home.